Gravure Ink
Hiprint SUPER LAM
Solvent Based Printing Inks For Flexible Packaging
Description
  For reverse printed lamination application on flexible films. Polyurethane based reverse lamination application ink suitable for various flexible films.
Application
 
Flexible packaging for confectionary and general purpose product pouches printed on different types of flexible substrate. Liquid packaging like shampoo sachets, oil pouches. Suitable for solvent based / solvent less adhesives and extrusion lamination. Lamination bonds are dependent on substrate type and quality, adhesive type and film weight applied.
Print Process
  Gravure
Print Substrate
 
Normal PET, CT PET, CC PET, Treated BOPP (PCT/ HST), Nylon, PVDC coated film, PT Cellophane
Key Product Feature
 
Excellent printability and re-solubility High color strength Higher bond strength Versatile ink suitable for all types of polyester Low solvent retention Suitable for speed from 100 M/M to 350 M/M
Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

4
N.A.
N.A.
2-7
N.A.
N.A.
N.A.
> 100 gmf/15mm
Rating Scale
 
1=lowest, 5=best value
Note
 
All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
 
Print Viscocity
Viscocity (In sec by B-4 cup @ 30° C)
Diluent
Slow
Normal
Fast
Retarder

~
~
~
~
~
~
~

Gravure
15-20

MIBK/TOL/IPA-2/2/1
MEK/TOL/IPA-2/2/1
MEK/TOL/IPA-3/2/1
MIBK
Remark
 
Not recommended for surface printing application Use 3% ABA in case of CC PET to avoid blocking For better chemical resistance, long shelf life of packaged products, for retort and boil application and for extrusion lamination process, 0.5 to 3% Hiprint hardener is suggested to use I the last color or all colors (based on requirement)
Health and Safety
 
Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
 
Please refer to general guidelines for handling inks for flexible packaging
 
Hiprint LAM PLUS
Description
 
Solvent based lamination ink is suitable for reverse printing on polyester film.
Application
 
All type of lamination packages.
Print Process
 
Gravure
Print Substrate
 
Polyester (untreated / Corona - treated / chemically treated)
Key Product Feature
 
Excellent printability and resolubility, High colour strength, High bond strength, Versatile ink, suitable for all types of polyesters, Excellent reusability and stability resulting in less wastage, Low solvent retention, Low skin formation on machine, Suitable for speed from 50 meters per minute to 200 meters oer minute.
Ink Application Details
  THINNER RECOMMENDED
  FOR FLEXO :
 
Fast
Normal

~
~

 
   
  FOR GRAVURE :
 
Slow
Retarder

Recommended print speed (mtrs/min)
SolidContent + /-(5%)
Print Viscocity (In sec by Ford cup @ 30° C)

~
~

~
~
~

MIBK + Toluene + Ethyl Acetate (1:3:2)
MIBK

20 - 250
Colours 20-30 White 40%
Gravure 17-20
Remark
 
Not recommended for surface printing applications, Bright and excellent print sharpness, Good lamination bond strength.
Health and Safety
 
Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
 
Please refer to general guidelines for handling inks for flexible packaging.
 
Hiprint PET
Description
 
Vinyl based lamination ink suitable for lamination application of flexible films. Vinyl based reverse ink suitable for lamination on flexible films.
Application
 
Flexible packaging for confectionary and general purpose product pouches printed on different types of Polyester substrate. Lamination bonds are dependent on substrate type and quality, adhesive type and film weight applied.
Print Process
 
Gravure
Print Substrate
  Normal PET, CT PET, CC PET
Key Product Feature
 
Excellent printability and re-solubility, High color strength, Higher bond strength, Versatile ink suitable for all types of Polyester, Low solvent retention, Suitable for speed from 50 M/M to 250 M/M
Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

4
N.A.
N.A.
2-7
N.A.
N.A.
N.A.
>100 gmf/15mm
Rating Scale
 
1=lowest, 5=best value
Note
 
All resistance properties are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
 
Print Viscocity
Viscocity (In sec by B-4 cup @ 30°C)
Diluent
Slow
Normal
Fast
Retarder

~
~
~
~
~
~
~

Gravure
15-20

MIBK/TOL/EA-1:3:2
TOL/EA-1:1
MEK/TOL/EA-2/2/1
MIBK
Remark
 
Not recommended for surface printing application Use 3% ABA in case of CC PET to avoid blocking For printing on OPP, please consult our technical department.
Health and Safety
 
Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
 

Please refer to general guidelines for handling inks for flexible packaging

 
Hiprint DnF
Description
 
Polyamide based ink suitable for printing on various films.
Application
  Milk Pouches
Print Process
  Gravure
Print Substrate
  Treated LDPE
Key Product Feature
 
Excellent printability and re-solubility, High color strength, Excellent wet and dry rub resistance, Excellent scuff and nail resistance, Good Milk and fat resistance, Suitable for speed from 40 M/M to 120 M/M
Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

5
N.A.
4
2-7
5
5
3
N.A.
Rating Scale
 

1 = lowest, 5 = best value

Note
 
All resistance properties / LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
 
Print Viscocity
Viscocity (In sec by B-4 cup @ 30°C)
Diluent
Slow
Normal
Fast
Retarder

~
~
~
~
~
~
~

Gravure
15-20

TOL/n-Propanol —4/1
TOL/ ISO Propyl Alcohol - 4/1
TOL/ ISO Propyl Alcohol -1/1
NBA
Health and Safety
 

Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling
 

Please refer to general guidelines for handling inks for flexible packaging

 
Hiprint FRESH
Description
 

Polyamide based ink suitable for printing on various films.

Application
 

General purpose, Shopping bags, Twist wrappers

Print Process
 

Gravure & Flexo

Print Substrate
 

Treated PP and PE, PVC, Cellophane, Metallized PVC/BOPP/PET, Pearl BOPP

Key Product Feature
 

Excellent printability and re-solubility, High color strength, Excellent wet and dry rub resistance, Excellent scuff and nail resistance, Suitable for speed from 40 M/M to 120 M/M

Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

5
80°C
4
2-7
2
2
2
N.A.
Rating Scale
 

1=lowest, 5=best value

Note
 
All resistance properties/LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.
 
Print Viscocity
Viscocity (In sec by B-4 cup @ 30° C)
Diluent
Slow
Normal
Fast
Retarder
~
~
~
~
~
~
~

FLEXO
25-35

Ethyl Alcohol/n-Propanol-4/1
ISO Propyl Alcohol / N-Propanol - 4/1

N-Propanol
~
~
~
~
~
~
~

GRAVURE
15-20


TOL/ ISO Propyl Alcohol -4/1
TOL/ ISO Propyl Alcohol -1/1
NBA
Health and Safety
 

Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling
 

Please refer to general guidelines for handling inks for flexible packaging

 
Hiprint SHRINK
Solvent Based Printing Inks For Flexible Packaging
Description
 

For reverse printed non lamination application on flexible films. Vinyl based reverse ink for non lamination application on flexible films.

Application
 

Flexible packaging for confectionary and general purpose product shrink sleeves printed on shrink PVC.

Print Process
 

Gravure

Print Substrate
 

Shrink PVC

Key Product Feature
 

Excellent printability and re-solubility, High color strength, Suitable for speed from 50 M/M to 250 M/M

Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

4
N.A.
N.A.
2-7
4
4
3
N.A.
Rating Scale
 

1=lowest, 5=best value

Note
 

All resistance properties/LF are guideline only, and dependent on pigment selection, tone to tone (half tone & full tone), print quality and substrate to substrate.

 
Print Viscocity
Viscocity (In sec by B-4 cup @ 30° C)
Diluent
Slow
Normal
Fast
Retarder

~
~
~
~
~
~
~

GRAVURE
15-20

BA/TOL/EA-1/2/2
TOL/EA-1/1
TOL/EA-1/2
BA
Health and Safety
 

Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.

Ink Handling
 

Please refer to general guidelines for handling inks for flexible packaging

 
Hiprint ALCO
Description
  Solvent based ink suitable for printing on various films, paper and foil. A common ink suitable for both surface and reverse printing / lamination applications.
Application
  Chocolate and food wrappers, all laminate pouches.
Print Process
  Flexo and Gravure
Print Substrate
  Treated polyester, Primed polyester, Treated Bopp, Aluminium foil, Pearlised Bopp, Treated PP & PE, Paper board, Nylon
Key Product Feature
 
High colour strength, Excellent dot production, High quality tonal and fine line printing, Heat resistance (1800C), Suitable for both surface and lamination jobs, Excellent lamination bond strength (primed PET & OPP).
Ink Application Details
 

FOR FLEXO :
Thinner
Retarder

FOR GRAVURE :
Thinner
Retarder

Recommended print speed (mtrs/min)
Solid Content+ /-(5%)
Print Viscocity (In sec by Ford cup @ 30° C)


~
~


~
~

~
~
~


IPA
Methoxy Propanol


Ethyl Acetate + IPA
Methoxy Propanol

30 - 300
Colours 31% White 46%
18 - 20
Remark
  For surface printing application, add additive 5% supplied by Cytech Coatings. For heat resistance above 1800C, please consult our technical department.
Health and Safety
  Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
  Please refer to general guidelines for handling inks for flexible packaging.
 
Hiprint TEMP
Description
 
For Surface printed application for high heat resistace ink suitable for surface printing aluminium foil. NC based surface printing application for high heat resistace requirement, suitable for surface printing aluminium foil.
Application
  Pharmaceutical, Paper bags, Chocolate and food wrapper, Laminate pouches (coated polyester only).
Print Process
  Gravure & Flexo
Print Substrate
  Blister foil, Normal foil, Chromo paper, Glassine, Metallized paper, CC PET
Key Product Feature
 
Excellent printability and re-solubility, High color strength, High heat resistance property (2200C), Excellent scuff resistance, Suitable for speed from 50 M/M to 350 M/M
Properties
 
Ink Adhesion
Heat Resistance
Gloss
Light Fastness
Water Resistance
Deep Freeze Resistance
Vegetable Oil Resistance
Lamination Bonds
~
~
~
~
~
~
~
~

5
180-220°C
4
2-7
3
4
3
N.A.
Rating Scale
  1=lowest, 5=best value
Note
 
All resistance properties/LF are guideline only, and dependent on pigment selection, tone to tone (half tones full tone), print quality and substrate to substrate.
 
Print Viscocity
Viscocity (ln sec by B-4 cup @ 30°C)
Diluent
Slow
Normal
Fast
Retarder
~
~
~
~
~
~
~

FLEXO
25 - 35

Ethyl Alcohol / n-Propyl Acetate - 3/1
Ethyl Alcohol/Methoxy propanol - 4/1

Ethoxy Propanol or Methoxy Propanol
~
~
~
~
~
~
~

GRAVURE
25 - 30


Ethyl Alcohol/Ethyl Acetate -1/1
Ethyl Alcohol/Ethyl Acetate -1/3
Ethoxy Propanol or Methoxy Propanol
Health and Safety
  Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
  Please refer to general guidelines for handling inks for flexible packaging
 
Hiprint TOP
Description
  Solvent based heat suitable for paper printing.
Application
  Cigarette packs, Label printing, Paper bags, Chocolate and Food wrappers.
Print Process
  Flexo & Gravure
Print Substrate
  Paper, Board
Key Product Feature
  High colour strength, Excellent dot reproduction, High Quality and fine line printing.
Ink Application Details
 

THINNER RECOMMENDED
FOR FLEXO :
Thinner
Retarder

FOR GRAVURE :
Thinner
Retarder

Recommended print speed (mtrs/min)
Solid Content+ /-(5%)
Print Viscocity (ln sec by Ford cup @ 30° C)



~
~


~
~

~
~
~



IPA
Methoxy Propanol


Ethyl Acetate
Methoxy Propanol

60-250
Colours 31% White 46%
18-20
Remark
  Bright and excellent print sharpness.
Health and Safety
  Read the Health and Safety guidelines before using these products. The user is responsible for all local legislation requirement and packaging conditions.
Ink Handling
  Please refer to general guidelines for handling inks for flexible packaging.
 
     
 
 
 
 
   
 
 
|
|
|
|
 
 
Hitech Litho Pvt. Ltd.
PLOT NO - 3/3, N.C.W.I ZONE, G.I.D.C., SARIGAM - 396155, TALUKA, UMARGAON, DIST - VALSAD, GUJARAT, INDIA.
Tel : 0260 - 2780109
, Email : hitechlitho@gmail.com
 
  Created and Hosted By Softweb Information Technology Pvt. Ltd.